Out of stock

The PT250 is a machine for welding pipes and fittings in PE, PP, PVDF and other thermoplastics.
The complete PT250 equipment is supplied with: basic machine diameter 250, detachable heating mirror coated in PTFE, detachable electric cooler and electrohydraulic motor, clamp for accessories diameter 250mm and set of light alloy reducing inserts diameters 63, 75, 90, 110, 125, 140, 160, 180, 200 and 225mm.
New Beep-Beep system for anchoring the inserts, the screws are over! With a simple click, you can change the reductions, gaining comfort and time.
All Tecnodue PT model machines are prepared to use the LDU system. Reader and printer of the welding data, putting the tube that we are going to weld tells us the parameters to follow and at the end prints us a report indicating if the welding is correct or not.
Range: 63 – 250mm

SKU: PT250 Categories: ,


Technical specifications

Ambient temperature 0… 50ºC
Humidity 95 RH%
Temp.. transport and storage -10… 60ºC
Voltage 230 V
Frequency 50 Hz
Machine power 2.40 KW 10.4 A
Heating mirror IP 54 1.0 KW
Refresher IP 20 0.8 KW
Hydraulic unit IP 44 0.6 KW
Maximum working pressure 100 bar
Cylinders Selection 5.89 cm2
Maximum force 4,261 N
Pressure 0 – 100 bar
Scale precision manometer CI 1.0
Volumetric capacity of the pump 1.2 cm3/rev.
Capacity 1.68 l/min
Hydraulic oil ISO 46
Deposit 1.5 l
Transmission system By gear
Maximum carriage stroke 145 mm
Scroll bar diameter 35 mm
Distance between cylinders 360 mm
Basic machine 900x510x520 mm
Refresher 650x480x85 mm
Heating mirror 465x550x65 mm
Hydraulic unit 445x320x270 mm
Mirror and Refractor Support 415x510x370 mm
Basic machine 45 kg
Refresher 14.5 kg
Heating mirror 10 kg
Hydraulic unit 26 kg
Mirror and Refractor Support 12 kg
Transport box 55 kg
Lide holder plate 6.5 kg
Complete set of Inserts 26,5

Realizar consulta..


Go to Top