Out of stock

The PT630 is a machine for welding pipes and fittings in PE, PP, PVDF and other thermoplastics.
The complete PT630 equipment is supplied with: basic machine diameter 630, detachable heating mirror coated in PTFE, detachable electric cooler and electrohydraulic motor, clamp for accessories diameter 630mm and set of light alloy reducing inserts diameters 315, 355, 400, 450, 500 and 560mm.
All Tecnodue PT model machines are prepared to use the LDU system. Reader and printer of the welding data, putting the tube that we are going to weld tells us the parameters to follow and at the end prints us a report indicating if the welding is correct or not.
Range: 315 – 630mm


Technical specifications

Ambient temperature 0… 50ºC
Humidity 95 RH%
Temp.. transport and storage -10… 60ºC
Voltage 230 V
Frequency 50 Hz
Machine power 11.5 kW 17 A
Heating mirror IP 54 9.3 KW
Refresher IP 20 1.1 KW
Hydraulic unit IP 44 1.1 KW
Maximum working pressure 160 bar
Cylinders Selection 17.27 cm2
Pressure 0 – 160 bar
Scale precision manometer CI 1.0
Revolutions motor hydraulic unit 2800 rpm
Volumetric capacity of the pump 2 cm3/rev.
Capacity 5.6 l/min
Hydraulic oil ISO 46
Deposit 7 l
Transmission system Chain
Maximum carriage stroke 240 mm
Scroll bar diameter 50 mm
Distance between cylinders 840 mm
Basic machine 1460x1050x1040 mm
Refresher 850x240x1050 mm
Heating mirror 1040x50x1050 mm
Hydraulic unit 700x360x400 mm
Mirror and Refractor Support 650x720x810 mm
Basic machine 229 kg
Refresher 107 kg
Heating mirror 47 kg
Hydraulic unit 41 kg
Mirror and Refractor Support 36 kg
Transport box 154 kg
Lide holder plate 41 kg
Complete set of Inserts 210 kg

Realizar consulta..


Go to Top