Out of stock

The PT315 is a machine for welding pipes and fittings in PE, PP, PVDF and other thermoplastics.
The complete PT315 equipment is supplied with: basic machine diameter 315, detachable heating mirror coated in PTFE, detachable electric cooler and electrohydraulic motor, clamp for accessories diameter 315mm and set of light alloy reducing inserts diameters 90, 110, 125, 140, 160, 180, 200, 225, 250 and 280mm.
New Beep-Beep system for anchoring the inserts, the screws are over! With a simple click, you can change the reductions, gaining comfort and time.
All Tecnodue PT model machines are prepared to use the LDU system. Reader and printer of the welding data, putting the tube that we are going to weld tells us the parameters to follow and at the end prints us a report indicating if the welding is correct or not.
Range: 90 – 315mm

SKU: PT315 Categories: ,


Technical specifications

Ambient temperature 0… 50ºC
Humidity 95 RH%
Temp.. transport and storage -10… 60ºC
Voltage 230 V
Frequency 50 Hz
Machine power 5.13 KW 22.3 A
Heating mirror IP 54 3.24 KW
Refresher IP 20 1.15 KW
Hydraulic unit IP 44 0.74 KW
Maximum working pressure 140 bar
Cylinders Selection 8.46 cm2
Pressure 0 – 160 bar
Scale precision manometer CI 1.0
Volumetric capacity of the pump 1.2 cm3/rev.
Capacity 3.36 l/min
Hydraulic oil ISO 46
Deposit 1.5 l
Transmission system Chain
Maximum carriage stroke 145 mm
Scroll bar diameter 35 mm
Distance between cylinders 440 mm
Basic machine 1050x509x600 mm
Refresher 564x5000x395 mm
Heating mirror 580x65x350 mm
Hydraulic unit 480x320x270 mm
Mirror and Refractor Support 500x410x500 mm
Basic machine 78 kg
Refresher 27 kg
Heating mirror 13 kg
Hydraulic unit 28 kg
Mirror and Refractor Support 16 kg
Transport box 68 kg
Lide holder plate 8 kg
Complete set of Inserts 77 kg

Realizar consulta..


Go to Top