Out of stock

Range: 63 – 200 mm
The PT200 is a machine for welding pipe and fittings in PE, PP, PVDF and other thermoplastics.
The complete PT200 equipment is supplied with: basic machine diameter 200, detachable heating mirror coated in PTFE, detachable electric cooler and electrohydraulic motor, clamp for accessories diameter 200mm and set of light alloy reducing inserts diameters 63, 75, 90, 110, 125, 140, 160 and 180mm.
New Beep-Beep system for anchoring the inserts, the screws are over! With a simple click, you can change the reductions, gaining comfort and time.
All Tecnodue PT model machines are prepared to use the LDU system. Reader and printer of the welding data, putting the tube that we are going to weld tells us the parameters to follow and at the end prints us a report indicating if the welding is correct or not.

SKU: PT200 Categories: ,


Technical specifications

Ambient temperature 0… 50ºC
Humidity 95 RH%
Temp.. transport and storage -10… 60ºC
Voltage 230 V
Frequency 50 Hz
Machine power 2.82 KW 12.3 A
Heating mirror IP 54 1.42 KW
Refresher IP 20 0.8 KW
Hydraulic unit IP 44 0.6 KW
Maximum working pressure 100 bar
Cylinders Selection 4.32 cm2
Pressure 0 – 100 bar
Scale precision manometer 1400 rpm
Volumetric capacity of the pump 1.2 cm3/rev.
Capacity 1.68 l/min
Hydraulic oil ISO 46
Deposit 1.5 l
Transmission system By gear
Maximum carriage stroke 145 mm
Scroll bar diameter 25 mm
Distance between cylinders 310 mm
Basic machine 895x320x470 mm
Refresher 470x440x84 mm
Heating mirror 420x350x72 mm
Hydraulic unit 445x320x270 mm
Mirror and Refractor Support 415x550x270 mm
Basic machine 46 kg
Refresher 13 kg
Heating mirror 6.5 kg
Hydraulic unit 26 kg
Mirror and Refractor Support 8 kg
Transport box 47 kg
Lide holder plate 4 kg
Complete set of Inserts

Realizar consulta..


Go to Top