Out of stock

The PT160 is a machine for welding pipes and fittings in PE, PP, PVDF and other thermoplastics.
The complete equipment of the PT160 is supplied with: basic machine diameter 160, detachable heating mirror coated in PTFE, detachable electric cooler and electrohydraulic motor, clamp for accessories diameter 160mm and set of light alloy reducing inserts diameters 40, 50, 63, 75, 90, 110, 125 and 140mm.
New Beep-Beep system for anchoring the inserts, the screws are over! With a simple click, you can change the reductions, gaining comfort and time.
All Tecnodue PT model machines are prepared to use the LDU system. Reader and printer of the welding data, putting the tube that we are going to weld tells us the parameters to follow and at the end prints us a report indicating if the welding is correct or not.
Range: 40 – 160 mm

SKU: PT160 Categories: ,


Technical specifications

Ambient temperature0… 50ºC
Humidity95 RH%
Temp.. transport and storage-10… 60ºC
Voltage230 V
Frequency50 Hz
Machine power2.40 KW 10.4 A
Heating mirrorIP 54 1.0 KW
RefresherIP 20 0.8 KW
Hydraulic unitIP 44 0.6 KW
Maximum working pressure100 bar
Cylinders Selection4.32 cm2
Pressure0 – 100 bar
Scale precision manometer1400 rpm
Volumetric capacity of the pump1.2 cm3/rev.
Capacity1.68 l/min
Hydraulic oilISO 46
Deposit1.5 l
Transmission systemBy gear
Maximum carriage stroke145 mm
Scroll bar diameter25 mm
Distance between cylinders270 mm
Basic machine915x465x455 mm
Refresher520x400x80 mm
Heating mirror451x350x65 mm
Hydraulic unit445x320x270 mm
Mirror and Refractor Support380x430x450 mm
Basic machine35 kg
Refresher11 kg
Heating mirror5 kg
Hydraulic unit26 kg
Mirror and Refractor Support7 kg
Transport box47 kg
Lide holder plate3.5 kg
Complete set of Inserts26.5

Realizar consulta..


Go to Top