Out of stock

The PT355 is a machine for welding pipes and fittings in PE, PP, PVDF and other thermoplastics.
The complete PT355 equipment is supplied with: basic machine diameter 355, detachable heating mirror coated in PTFE, detachable electric cooler and electrohydraulic motor, clamp for accessories diameter 355mm and set of light alloy reducing inserts diameters 90, 110, 125, 140, 160, 180, 200, 225, 250, 280 and 315mm.
New Beep-Beep system for anchoring the inserts, the screws are over! With a simple click, you can change the reductions, gaining comfort and time.
All Tecnodue PT model machines are prepared to use the LDU system. Reader and printer of the welding data, putting the tube that we are going to weld tells us the parameters to follow and at the end prints us a report indicating if the welding is correct or not.
Range: 90 – 355mm

SKU: PT355 Categories: ,


Technical specifications

Ambient temperature0… 50ºC
Humidity95 RH%
Temp.. transport and storage-10… 60ºC
Voltage230 V
Frequency50 Hz
Machine power5.13 KW 22.3 A
Heating mirrorIP 54 3.24 KW
RefresherIP 20 1.15 KW
Hydraulic unitIP 44 0.74 KW
Maximum working pressure140 bar
Cylinders Selection8.46 cm2
Maximum force4,261 N
Pressure0 – 160 bar
Scale precision manometerCI 1.0
Volumetric capacity of the pump1.2 cm3/rev.
Capacity3.36 l/min
Hydraulic oilISO 46
Deposit1.5 l
Transmission systemChain
Maximum carriage stroke145 mm
Scroll bar diameter35 mm
Distance between cylinders480 mm
Basic machine1125x680x640 mm
Refresher434x700x410 mm
Heating mirror600x65x390 mm
Hydraulic unit480x320x270 mm
Mirror and Refractor Support500x450x500 mm
Basic machine96 kg
Refresher28 kg
Heating mirror19 kg
Hydraulic unit28 kg
Mirror and Refractor Support17 kg
Transport box77 kg
Lide holder plate16 kg
Complete set of Inserts79

Realizar consulta..


Go to Top