Out of stock

The PT1600 is a machine for welding pipes and fittings in PE, PP, PVDF and other thermoplastics.
It is supplied complete with: basic machine diameter 1600, detachable heating mirror coated in PTFE, detachable electric cooler and electrohydraulic motor, clamp for accessories diameter 1600mm and set of light alloy reducing inserts diameters 1000, 1200 and 1400mm.
All Tecnodue PT model machines are prepared to use the LDU system. Reader and printer of the welding data, putting the tube that we are going to weld tells us the parameters to follow and at the end prints us a report indicating if the welding is correct or not.
Range: 1000 – 1600mm

SKU: PT1600 Categories: , ,


Technical specifications

Ambient temperature 0… 50ºC
Humidity 95 RH%
Temp.. transport and storage -10… 60ºC
Voltage 400 V 3ph
Frequency 50 Hz
Machine power 55.9 KW 82 A
Heating mirror IP 54 48.90 KW
Refresher IP 20 3.05 KW
Hydraulic unit IP 44 4.0 KW (2800 rpm)
Electric crane motor 1.85 KW
Maximum working pressure 160 bar
Cylinders Selection 69.08 cm2
Pressure 0 – 160 bar
Scale precision manometer CI 1.0
Revolutions motor hydraulic unit 2800 rpm
Volumetric capacity of the pump 5 cm3/rev.
Capacity 18 l/min
Hydraulic oil ISO 46
Deposit 7 l
Transmission system Chain
Maximum carriage stroke 690 mm
Scroll bar diameter 100 mm
Distance between cylinders 1900 mm
Basic machine 3500x2270x2350 mm
Refresher 2140x440x2250 mm
Heating mirror 2000x250x2250 mm
Hydraulic unit 800x510x310 mm
Mirror and Refractor Support 1760x1500x1880 mm
Basic machine 2560 kg
Refresher 858 kg
Heating mirror 260 kg
Hydraulic unit 54 kg
Mirror and Refractor Support 460 kg
Lide holder plate 350 kg
Complete set of Inserts 1896 kg

Realizar consulta..


Go to Top