Out of stock

Built for the harshest conditions, the EF40 is the most reliable in its category for electrofusion welding of polyethylene, polypropylene and PVC tubes from diameter 16 to 710mm.
The machine is designed with an iron protection that together with the fiber housing make it a very hard machine prepared for the extreme conditions found on the site.
In the EF40, electrofusion welding data can be entered in two ways:
Automatically using the barcode scanner, only by going over the barcode recognizes the accessory and automatically selects the voltage and time needed for electrofusion welding.
With the alphanumeric keys they can enter the operator data and the most important welding data.
The screen is high contrast and backlit, allows excellent visibility in all lighting conditions.
Thanks to the USB connection, it allows the transfer of data between the machine and the computer, using the pen drive memory. This functionality allows you to renew the software without having to return the machine to technical service. Thanks to this, he always works with the latest technology in electrofusion.
The machine allows to store 2048 welds in the memory, for later download through the USB port. All welds are recorded in an internal SD type memory.


Technical specifications

Modes of Operation Barcode
Uponor Semi-Auto
Duraphase Semi-Auto
Machine language English, Spanish( Other languages on demand )
Working temperature From -20ºC to +40ºC
Input data By alphanumeric keys
By scanner automatically
Memory data 1000 welds, minimum
Download data USB flash drive
Input voltage 230V
Voltage required for work from 184V to 276V, +/-20%
Input intensity from 1A to 14A
Input frequency 50 Hz ( from 40 to 70 Hz )
Output voltage 39.5 V ( from 8V to 48 )
Output stability +/- 1,5%
Output intensity from 1A to 60A
Power consumption from 40W to 2570W
Welding time from 1 sec. Up to 3500 sec
Welding diameters from 16mm to 710mm
Protection IP65
Input cable 10 mts
Output cable 3 mts
Weight 28 kg
Measurement 38cm x 38cm x 39cm


Go to Top