One week more we bring you another publication with the intention of keeping you informed the best possible with all the news in the sector of the plastic welding. In this occasion we have wanted to make a compilation exclusive for you of the most read publications in our blog. Some contents that our readers have looked for with higher interest and we wait they have been very useful to carry out works or to choose the ideal machine.

Here and before starting to talk about all of them, we will show you a small list with the titles of the 10 most read publications since we have created our blog.

  1. Step by step of the welding of plastics in your workshop.
  2. The four basic rules of the welding of plastics.
  3. The butt thermofusion welding (Video).
  4. Manual welding of a sheet of PVC (video).
  5. Sheets of PVC for waterproofing.
  6. How it must be a good professional of the welding?
  7. Methods of joins for geomembranes of polyethylene (HDPE).
  8. Previous preparation of the electrofusion welding (expert’s opinion).
  9. Steps to follow a butt welding with machine.
  10. How to prove the weld ability of some types of plastics.

This week we are going to talk of the first 4 ones, that as you can appreciate, great part of the  publications are about the welding process and this is due that in them we will publish in great detail with videos and step by step how to get the perfect welding with different welders.

STEP BY STEP OF THE WELDING OF PLASTICS IN YOUR WORSHOP

This is our most seen post with more than 11.000 visits since its publication. To this day it is still the most seen post month after month.

welding machine,welding, plastic welding, plastic welding machines,plastics welding, thermoplastic welding, polyethylene welders, polyethylene welding, PE welding,polypropylene welding,pvc welding machine

The success of this publication is in the subject it is about. We explain the machines you can use, with which fittings and how you must use them to get a manual welding with thousands of applications.

This is the quickest, easiest and less expensive way of welding pieces of plastic (bumpers, deposits, containers…).

………………

Besides, we give some very instructive final advice that will help you in your welding. I leave you a link below so that you can read the publication:

>>> Step by step of the welding of plastics in your workshop

THE FOUR BASIC RULES OF THE WELDING OF PLASTICS

In this another publication with more than 7000 visits, we were focused on explaining the fundaments of how to perform a welding. And it is when you weld manually, there are 4 great rules that you must always remember to weld without any problems.

welding machine,welding, plastic welding, plastic welding machines,plastics welding, thermoplastic welding, polyethylene welders, polyethylene welding, PE welding,polypropylene welding,pvc welding machine

These 4 rules among which they are included the fusion temperature and the pressure, which are the basis of the welding and if the set guidelines are not followed, you could not weld.

THE BUTT THERMOFUSION WELDING (Video)

With more than 6500 visits, this is the 3rd most seen post of our blog and it is not a surprise, as the butt welding of pipes is the most used process to join plastic pipes, especially the HDPE ones.

This is a simple, quick and cheap method to join pipes (among them or with its fittings) without the need of using additional elements of join. When heating the ends of the pipe at fusion temperature and putting the correct pressure among them so you will get the welding.

………………

This process requires great knowledge of the whole steps, which we will explain in great detail and with a video in the following link.

>>> The thermofusion welding

PROCESS OF THE MANUAL WELDING OF THE SHEET OF PVC (Video)

This publication has more than 4000 visits and it is directed to two sectors in short, the waterproofing of covers and the construction of awnings.

In it, we explain how to join two sheets of PVC (it could also be another material) to get a waterproofing of the area we want (roofs, terraces, awnings…). This is the most simple and cheapest method, provided that they are not so large works. It can also be used to collocate patches or to make reparations in tarpaulins of trucks…

………………

Learn how to do this type of welding with the following publication in which we also include a demonstrative video:

>>> Process of the manual welding of the sheet of PVC (video)

With this publication we have already explained the first 4 ones that we had promised at the beginning and you can comment if you want to add more information or if it has been useful for you.

We remember you that you have read the first part, so you should be attentive because the following part will be published very soon or you can subscribe to our blog and we tell us by email when we publish it!