Outside Air Extruder2017-04-27T16:21:06+00:00

Outside Air Extruder

The other Munsch extruders family are the Outside Air Extruders. Means that the heater machine has no motor built-in to create their own air flow, so in order to have a properly air flow they need an external fan/blower tool, that feed this air heater trough a hose.

These models that we have in our catalogue are the same, the family MAK ( Air Incorporated ) as the family MEK ( Outside Air ) being their only difference, the heater, that appears located on the upper part .

This type of machines in general are extruders that are used, basically in plastic workshops. Due they need outside air.They are not completely automatic machines, totally independent, to be used to perform weldings out of the workshop.

 

On the other side as there is no heater in, they become the lighter extruder machines, perfect for be used daily, as they don’t dispose of a motor-in, the reparations are minimal.

Regardless to these two little differences, the MEK range covers the machines with an output of 1.8 kg/ hour till 6,5kg / hour.

MEK18

Machine of extrusion with external air of 1,8kg/hora...

MEK 18S

Machine of extrusion with external air without electronics 1,8 kg/h...

MEK 25

Machine of extrusion with external air of 2,5kg/hora...

MEK 32

Machine of extrusion with external air of 3,2kg/hora...

MEK 36

Machine of extrusion with external air of 3,6kg/hora...

MEK 58

Machine of extrusion with external air of 5,8 kg/hora...

MEK 65

Machine of extrusion with external air of 6,5 kg/hora...





   I have read and accept the legal notice*

SUBSCRIBE BY RSS